1·Shunt capacitance may increase the settling time.
分流电容可增大稳定时间。
2·Section 2.6.4 discusses circuit settling time considerations in more detail.
第2.6.4节将对电路的建立时间问题进行更详细的讨论。
3·Though the traditional PID is simple, the settling time is long and the effect is un- ideal.
通常所采用的传统PID控制算法虽然简单，但系统调节时间较长，控制效果不理想。
4·Instead of settling time, free settling space was the direct influencing factor for granulation.
污泥颗粒化的直接影响因素不是沉淀时间而是自由沉淀空间。
5·Settling Time—This is the time required for the circuit to stabilize once the relay has been closed.
稳定时间——是指继电器关闭后电路达到稳定所需的时间。
6·The settling time of the circuit is particularly important when making high resistance measurements.
在进行高电阻测量时，电路的建立时间特别重要。
7·After a relay is closed, it's important to allow sufficient settling time before taking a measurement.
在继电器被闭合后，在进行测量之前要留有足够的稳定时间，这点非常重要。
8·Thus, a settling time of 50 seconds would be required for the reading to settle to within 1% of final value.
因此，为使读数稳定到与其最终值相差1%，就需要50秒的建立时间。
9·A low current measurement system may also require significant settling time be fore the expected accuracy can be obtained.
对于小电流测量系统，也需要足够的稳定时间才能够获得预期的准确度。
10·The violations of specifications such as percent overshoot and settling time are penalized in the fitness function of GASA.
对设定的性能指标如超调量和调整时间的违背量将作为GASA适应度函数中的惩罚项。